Edge Rounding
Sharp edges on sheet metal parts can lead to injuries during handling or can cut wires when mounting to a machine so they should be avoided. Rounding the edges will also lead to a greater coating thickness at the edges after painting or powder coating. In modern day sheet metal processing, rounding edges is a standard procedure.
The task of a deburring and edge rounding machine is to achieve an even result on all edges, regardless of the contour of the workpiece. The abrasive tools should also wear evenly in order to avoid time-consuming calibrating or re-adjusting. Loewer machines with TD-units fufill all these requirements: they deliver a uniform 360° processing of parts together with even tool wear and the grade of edge breaking is adjustable from light to heavy.
Our machines for edge rounding
DiscMaster 2TD
For 360° deburring, edge rounding, oxide removal or orbital finishing. Features two units in a working width of 500mm.
More
DiscMaster 4TD
For 360° deburring, edge rounding, oxide removal or orbital finishsing. Features two units in working widths of 1000mm or 1500mm.
More
DiscMaster 6TD
For 360° deburring, edge rounding, oxide removal or orbital finishing. Features three units in working widths of 1000mm or 1500mm.
More
BeltMaster K4TD
For finishing as well as 360° deburring, edge rounding, oxide removal or orbital finishing. Features three units in a working width of 1350mm or 1500mm.
More
RotoMaster 1500
For finishing as well as 360° deburring, edge rounding and oxide removal. Edge rounding up to 2mm radius in 1500mm working width.
More
CrossMaster DD
For deburring and edge rounding smaller parts in working widths of 150mm or 300mm.
More
BeltMaster 300
For deburring, edge rounding and finish in a working width of 300mm.
More
CrossMaster Dx2
For top and bottom deburring and edge rounding in one pass in a working width of 200mm.
More
SwingGrinder
The Original – semi-automatic solution for quick and easy deburring and edge rounding.
More
DiscMaster SF
For top and bottom deburring, edge rounding or oxide removal from all angles and directions in working widths of 1000mm or 1500mm.
More
DiscMaster 3D
For deburring, edge rounding or roughening of aluminium parts in a working width of 1350mm or 1850mm.
More
DiscMaster P
For deburring, edge rounding or roughening aluminium parts from all angles in a working width of 1350mm.
More
